SC Series
Standard Threaded Plastic Caps
SC Series standard threaded plastic caps are manufactured with internal threads to provide a positive snap fit when the part is either screwed on or simply pressed into place. This keeps them firmly positioned once installed and increases their effectiveness at blocking out dirt, moisture, and other corrosive elements. Quality caps of this design are great for preventing physical damage to your equipment. Browse our list below for the right threaded plastic caps to suit your specific needs.
- Typical wall thickness: .032
- Color: Blue
- Material: Low Density Polyethylene
- LDPE service temperature: 150° F (66° C)
- Applicable specs: MIL-C-52078, MIL-C-5501/3R, MIL-C-5501/11 (NAS-814), NAS-832
- RoHS Compliant
Product Options
Please confirm that your Part Number is correct and adjust the other selections below to meet your application's requirements.
Make Your Selection Below
| PART NO. | COLOR | MATERIAL | TO CAP THREAD SIZE | TUBING OUTSIDE DIAMETER | A | PRODUCT OPTIONS | |
|---|---|---|---|---|---|---|---|
| in. | |||||||
| SC-01 | Blue | Standard LDPE | 3/8"-24 Standard | 3/16" | 0.470 | 15,000 | 1 |
| SC-02 | Blue | Standard LDPE | 7/16"-20 Standard | 1/4" | 0.500 | 10,000 | 1 |
| SC-05 | Blue | Standard LDPE | 1/2"-20 Standard | 5/16" | 0.500 | 9,000 | 1 |
| SC-10 | Blue | Standard LDPE | 9/16-18 Standard | 9/16" | 0.530 | 5,000 | 1 |
| SC-12 | Blue | Standard LDPE | 5/8"-18 Standard | 3/8" | 0.813 | 3,500 | 1 |
| SC-14 | Blue | Standard LDPE | 3/4"-16 Standard | 1/2" | 0.625 | 3,500 | 1 |
| SC-3/4 | Blue | Standard LDPE | 3/4" NPT | N/A | 0.750 | 3,000 | 1 |
| SC-17 | Blue | Standard LDPE | 7/8"-14 Standard | 5/8" | 0.690 | 2,400 | 1 |
| SC-21 | Blue | Standard LDPE | 1"-14 Standard | N/A | 0.750 | 3,500 | 1 |
| SC-22 | Blue | Standard LDPE | 1 1/16"-12 Standard | 3/4" | 0.813 | 2,500 | 1 |
| SC-24 | Blue | Standard LDPE | 1 3/16-12 Standard | 1 3-16" | 0.940 | 3,500 | 1 |
| SC-27 | Blue | Standard LDPE | 1 5/16"-12 Standard | 1" | 0.875 | 1,800 | 1 |
| SC-30 | Red | UV Resistant LDPE | 1 5/8"-12 Standard | 1"-1/4" | 0.906 | 1,200 | 1 |
More Options
Tapered Caps
Tapered Series
End Caps
C Series
Long Plastic End Caps
CL Series
Short End Caps
CS Series
Electrical Connector Caps & Covers
RC Series
Meter Vent Caps
MVC Series
Covers All Threads Caps
CAT Series
Pipe Caps
PC Series
Friction Fit Face Seal Caps
FS Series
Flanged Caps
FC Series
Long Flanged Caps
FCL Series
Tear Tab Caps
TC Series
Split Flange Coupling Caps
SFC Series
Flanged Washers
FW Series
VINYL END CAPS
VC Series
Rectangular Vinyl Caps
VF Series
Vinyl Grab Tab Caps
VGT Series
Vinyl Caps with Pull Tabs
VPT Series
Silicone Rubber Caps
SLC Series
Silicone Washer Caps
SWC Series
Silicone Flat End Caps
SFEC Series
Silicone Flanged Caps
SLFC Series
Silicone Square Caps
SSQ Series
Silicone Snap Ring Caps
SSRC Series