>> back to main menu

VF SERIES RECTANGULAR CAPS
Rectangular Caps are designed to fit most
rectangular tubes and bars. Some common
applications include ball valve handle covers,
paint shields and grips for tools and lever handles.
They slip on easily and provide a snug fit.

They range in size from .250 x .062
through 1.50 x .375.

RECTANGULAR CAPS / SLEEVES
A (in.)	B (mm.)	C (in.)	END (mm.)	MAX. LENGTH	(mm.)	ROUND	FLAT
0.062	1.58	0.25	6.35	3	76.2	-	X
0.125	3.18	0.25	6.235	3	76.2	-	X
0.062	1.58	0.375	9.53	3	76.2	-	X
0.062	1.58	0.5	12.7	3	76.2	-	X
0.125	3.18	0.5	12.7	3	76.2	-	X
0.125	3.18	0.58	14.73	3	76.2	X	-
0.062	1.58	0.625	15.88	3	76.2	X	-
0.125	3.18	0.625	15.88	3	76.2	X	-
0.125	3.18	0.75	19.05	3	76.2	X	-
0.125	3.18	0.875	22.23	3	76.2	X	-
0.125	3.18	1	25.4	3	76.2	X	-
0.125	3.18	1.25	31.76	3	76.2	X	-
0.375	9.53	1.25	31.76	3	76.2	X	-
0.375	9.53	1.5	38.1	3	76.2	X	-
0.125	3.18	3.125	79.38	3	76.2	X	-
NOTE: Other sizes may become available; please consult PMI Customer Service. Length listed is the maximum but can be adjusted downward in 1/16" increments to the minimum length.

	GENERAL DESCRIPTION	HARDNESS SHORE A	TENSIL	% ELONGATION	TEAR STRENGTH	SERVICE TEMP.		ELECTRICAL PROPERTIES
						LOW	HIGH
Standard	Glossy Gen. Purpose	75	2000	440	280	-22°F (-30°C)	+250°F (124°C)	Good
High Temp.	Heat Resistant	88	2100	330	270	0°F (-18°C)	+446°F (230°C)	Good
NOTE: Typically all vinyl products are made to your specifications. PMI has the ability to remain flexible when it comes to a required length or special colors.